Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications; Electromagnetic Compatibility - FLAEM Rhino Clear Mobile P0907EM Bedienungsanleitung

Mobile nasendusche mit akku
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

6. Technical specifications

Model:
Recharger base voltage:
Nebulisation chamber max. capacity:
Nebulisation time for 10 ml
Cumulative mass percentage oversize > 10 micron: between 95 and 96 %
(Fraction not inhaled useful for the treatment of the upper airways).
using the procedure devised by the Pharmaceutical Department of Parma University.
(2)
Average values measured with 0.9% NaCI saline solution in compliance with Flaem internal procedure.
Nasal irrigator dimensions:
Nasal irrigator weight:
In conformity with EEC directive 93/42:
Approvals:
Recharger base dimensions:
Total weight (recharger base with
unit and accessories):
Nasal irrigator internal batteries:
Operating conditions:
Storage conditions:
Operating/storage atmospheric pressure:
The type BF applied parts a re the 3 nasal adaptors (1a, 1b, 1c)
7. Symbols
Class II unit
Alternating current
Type BF applied part
IP45 Protected against solid foreign bodies
IP45
with Ø 1 mm or larger and against jets of
water

Electromagnetic compatibility:

This device was designed to meet the current requirements for electromagnetic compatibility (EN 60 601-1-2:2015).
For additional information please go to www.flaem.it. The Medical Device may be subject to electromagnetic
interference if other devices are used for specific diagnosis or treatments.
Flaem Nuova reserves the right to make technical and functional modifications to the product with no prior notice.
P0907EM
220-230V~ 50-60Hz / 18VA
15 ml
):
approx. 2 minutes (1 ml in approx. 12 seconds)
(2
(1)
7x6x15.5h cm
210 g
15x9x8h cm
480 g
Ni-MH, rechargeable, 1.2V 620/650mAh
Temperature: min +5°C; max 40°C
Air humidity: min 15%; max 90% RH
Temperature: min -10°C; max 45°C
Air humidity: min 10%; max 75% RH
min. 690 hPa; max. 1060 hPa P
(1)
Values measured with a computerised laser diffractometer Malvern Mastersizer,
Medical CE marking in compliance with Directive 93/42
and subsequent amendments. In accordance with EN
60601-1-11
Follow operating instructions
Operating instructions
TÜV approval
16

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis