Alarm Setting - LEXIBOOK CS100 Bedienungsanleitung

Activating / deactivating the alarm
To activate / deactivate the alarm, press
disappear on the display.
Setting the alarm
1. To set the alarm, press and hold
side of the screen starts blinking.
2. Press
3. Press
4. Press
Confirm using
Setting the radio alarm
5. If you selected the radio on step 4, use
for manual tuning and long press for automatic tuning. Confirm using
6. Press
Alarm operation
When it is alarm time, for example 7:00, the alarm will start the following way:
7:00: fragrance diffusion
7:01: fragrance diffusion and light on
7:03: fragrance diffusion, light on and alarm ringing
7:04: termination of the fragrance diffusion, light and alarm sound, and
Turning off the alarm
To turn the alarm off, press any touch-sensitive button (7).
Repeating the alarm (SNOOZE)
When the alarm starts ringing, press the SNOOZE button located above the
screen to repeat the alarm. In SNOOZE mode, the alarm icon will blink on the
display. The light and alarm sound will turn on again after 5 minutes. The process
can be repeated three times.
FM tuner: 87.5 ~ 108.0 MHz
Setting the radio frequency
1. To turn the radio on / off, press
2. To change the radio frequency, press
desired frequency appear on the display.
You can also press and hold
3. To change the sound level, press
CS100IM1337_101_V09.indd 9

ALARM SETTING

/ to set the hours. Confirm using
/ to set the minutes. Confirm using
/ to set the standard alarm sound (BIP) or the radio (RADI).
.
/ to set the volume from 1 to 10. Confirm using
activation of the snooze mode.
RADIO SETTING
. The corresponding icon will appear /
until the alarm time displayed on the left
.
.
/ to set a frequency: short press
.
/ successively until you see the
/ for an automatic tuning.
successively.
9
ENGLISH
.
.
18/8/17 2:55 pm