System Installation - Ultrak KC450xMP Bedienungsanleitung

3 SYSTEM INSTALLATION

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.
Perform the following steps to install the camera.
3.1
Remove all components from the package and identify the items that will be
used during installation :
• Camera
• Instruction Manual
• Mini din connector (for video-type or DC-type auto iris lens)
3.2
Other items used during the installation that are NOT supplied with the Camera
may include :
• Camera lens
• Video cable
• Camera stand or mounting bracket
• AC 24V or DC 12V power supply
• Mounting hardware
• Monitor
• Installation Tools
3.3
Select a suitable location for the camera. Install the camera stand or
mounting bracket in the selected location using a suitable fastener.
The camera stand or mounting bracket must be attached to a structural
object, such as a wall stud or ceiling rafter, that supports the weight of the
Camera and mount. The minimum recommended load rating for the
bracket is 5 kg (11 lbs).
3.4
The camera has mounting holes on the bottom and top of the
camera housing to allow for bottom or top mounting. The ¼"-20 UNC
Threaded mounting hole attaches to the bolt on the camera stand or
mounting bracket.
7