ELECTROCOMPANIET EMC 1 Bedienungsanleitung Seite 6

Unpacking the CD Player
Immediately upon receipt of the EMC 1 CD Player; inspect the carton for possible damage
during shipment. The carton and packaging have been designed to provide the safest
possible protection when transporting your CD Player.
Unpack the CD Player carefully. Save all packaging materials for future shipment.
The Content of the Carton
1 pcs Electrocompaniet EMC 1 CD Player
1 pcs AC power cord
1 pcs spare 1 Ampere Slow Blow Mains Fuse. (See page 11 for change of blown fuse)
1 pcs CD clamp
1 pcs Owner's Manual
1 pcs self-adhesive felt ring for placement of the CD clamp when not in use
2 pcs Allen keys for securing of the Electro Mechanical Cancellation System
Set-up Procedure
Before connecting to Mains check that the mains voltage printed on the rear panel of the
CD Player corresponds to the line voltage in the territory were you intend to use the unit.
How to avoid damages
A good operating practice is to turn off all equipment before any connections or
disconnections are made. Do not under any circumstances connect or disconnect
equipment when power is turned on. The design of the RCA plug generates a huge
transient when inserted. Connecting or disconnecting equipment with the power on could
severely damage both speakers and amplifier(s).
How to avoid noise problems
The EMC 1 contains delicate circuits that are sensitive to magnetic strayfields.
The unit should not be place near mains transformers, TVs etc. Care should also be taken
regarding placement of the interconnect cables. Do not run interconnect cables in parallel
with mains cords and loudspeaker cables. Keep interconnect cables as short as possible.