ELECTROCOMPANIET EMC 1 Bedienungsanleitung Seite 13

Replacing a blown Mains Fuse
Always remove the AC cord from the AC inlet.
The mains fuse is located in a small drawer
inside the AC inlet of the unit.
If, for some reason the fuse is blown, turn the
unit off, and remove the AC cord from the AC inlet.
Open the drawer with a small screwdriver and
remove the blown fuse.
The spare fuse is located inside a holder in
front of the mains fuse.
1. Remove and discard the blown fuse.
2. Remove the spare fuse gently by pushing
it sideways out of its holder.
3. Insert the spare fuse as the main fuse.
4. Push the drawer gently back to closed
position.
5. Re-insert the AC cord and turn the unit on.
Replacing Remote Control Batteries
Replace exhausted batteries by gently inserting your fingernail or small screwdriver in the
groove on the left side of the battery compartment cover. Lift the cover off, and insert a fresh
set of batteries as indicated by the diagram below. Be careful to follow the + and – polarity
indications at the bottom of the battery compartment.
Never replace the fuse with other
values than indicated on the unit!