Controls; Overview; Activating/Deactivating Alarm Signals - Silvercrest SKS 4 A1 Bedienungsanleitung Und Sicherheitshinweise

Controls

Overview

Overview of the buttons and switches on the back of the appliance:
Main switch
Lullaby button
SET button
Arrow buttons ▲ ▼
SW button
W./W.E. slider switch

Activating/deactivating alarm signals

You can set how and if the alarm should be switched on with the main switch
Set the main switch
to be displayed with light and sound. At the set wake-up or bedtime, sounds
or a melody will play for approx. 10 minutes. In addition, the upper part of
the motif disc
the lower part with the sleeping image at bedtime.
■ 10 │ GB │ IE │ NI
Key
slider switch
:
to the position
with the awake image is illuminated at wake-up time and
Function
► Switch alarm signals on and off:
Activate alarm with light and sound,
switch on light;
Activate alarm with light only (no sound),
switch on light;
Deactivate alarm (no light, no sound),
switch off light
► Press and hold for 3 seconds to play the set
lullaby; press again to stop (otherwise stops
automatically after 10 minutes)
► Press and hold for 3 seconds to call up the
menu
► Press to confirm menu entries
► In the standard display: display set alarm
times
► In the menu: navigate in the respective menu
► keep pressed for fast scrolling
► Switch between face and time on the
display
► Change alarm time mode:
W. = weekdays (Mon–Fri)
W.E.= weekend (Sat/Sun)
► Set the brightness of the display
if the wake-up time and bedtime are
SKS 4 A1