Medicura m255 Bedienungsanleitung Seite 17

Measurement
Press the "START" button to activate the appliance. All the symbols on
the display will come on, after which the last measurement performed will
appear. After a few seconds the wristband will inflate automatically.
The wristband will be inflated to the pressure of about 190mmHg and then
slowly deflate while measuring the pressure of the subject.
At this point the wristband deflates and the heart symbol flashes on the
display, in synchrony with the heart beat, if the pulses can be detected.
Relax and do not move during the measurement.
At the end of the measurement, the systolic pressure (maximum), diastolic
pressure (minimum), pulse rate and pressure level indicator ( ) appear
on the display, Fig. 3.
If the voice function has been activated, the appliance will say the values
recorded and the classification level in the preselected language.
If the appliance records an irregular pulse value, the following symbol
appears on the display:
Irregular pulse
symbol
Pressure level
indicator
Pulse symbol
The appliance automatically stores the result for up to a maximum of 60
measurements. When this limit has been reached, the new results
progressively replace the previous ones. The stored data can be displayed
complete with date and time.
( )
Figura 3
Systolic pressure
Diastolic pressure
Pulse rate
17