Controls And Indicators; Vertical Installation - Kenwood KA-S10 Bedienungsanleitung

Controls and indicators

POWER
ON
1
1
POWER switch
Switches the power ON and OFF.
2
VOLUME knob
Rotating the knob clockwise increases the volume level,
and rotating the knob counterclockwise decreases the
volume level.
3
Input indicator
The indicator for the input source selected with the
INPUT SELECTOR knob lights up.
All of the indicators are extinguished when the power
is switched OFF.

Vertical installation

The unit can be installed vertically, or on its left side, by using the pair of stands provided with it.
POWER switch
8
ENGLISH
VOLUME
OFF
MIN MAX
2
INPUT SELECTOR
AUX
CD
D.AUDIO
STEREO INTEGRATED AMPLIFIER KA-S10
3
4
INPUT SELECTOR knob
Selects the input source (D.AUDIO, CD or AUX).
5
N.B. CIRCUIT knob
Adjusts the bass tone in three steps.
Select the position according to the speakers in use or
your liking.
CAUTION
Be sure to observe the following cautions when in-
stalling the unit. Incorrect installation may cause the
unit to turn over or topple down and cause injuries.
÷ Always use the provided stands when installing the
unit vertically.
÷ When installing the unit vertically, position it so that
the POWER switch comes at the lower position as
shown in the illustration.
CAUTION
When installing the unit, be careful not to block the
ventilation openings to ensure sufficient heat radia-
tion. Otherwise, the heat pooled inside the unit may
cause malfunction or a fire hazard.
N.B.CIRCUIT
1 2
OFF
3
4 5