Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 - ACTIVATION VIA TELEPHONE PROGRAMMER
8.1 - TELEPHONE PROGRAMMER OPERATING MODE
G
The telephone programmer controls the chronothermostat by closing the
contact connected to terminals
B
connections).
Contact closed
= control activated
Contact open
= control not activated
When the chronothermostat is activated in:
manual or
P 06
(count-down program)
programmer (contact closed), it switches to
(*) with
"comfort"
temperature.
The display will show the symbols for permanent manual operation and
forcing by telephone programmer.
( )
* note
: if the chronothermostat is activated from the telephone programmer
in
temporary manual mode
temperature until midnight, then switches to
"comfort" temperature
.
Deactivation of telephone programmer forcing:
Open the telephone programmer contact (see programmer instructions) which
returns the chronothermostat to the operating mode selected when telephone
programmer control was activated.
Note: activating and deactivating controls are operational within one minute.
44
8
and
9
of the device (heading 4.4 - Electrical
temporary manual, permanent
mode by way of the telephone
"permanent manual operation"
, it retains this status, utilizing the "comfort"
permanent manual
t
1
.
0
2
R
/
DAY
PROG
utilizing the
DAY
2
ON
t1
t2
t3
4
6
8
10 12 14 16 18 20 22
°
C
/
½ h
OK
C
/
t
Werbung
Inhaltsverzeichnis
