Herunterladen Inhalt Inhalt Diese Seite drucken

Materiel Electrique PER1CRCR022B Bedienungsanleitung Seite 36

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
5 - PROGRAMMING THE CHRONOTHERMOSTAT
5.6 - CHANGING COMFORT, WORKING AND ECONOMY
G
TEMPERATURES
If the factory set temperatures:
B
t1
= 20 °C,
t2
= 18 °C,
t3
= 16,5 °C (winter)
t1
= 20 °C,
t2
= 22 °C,
t3
= 23,5 °C (summer)
do not appen to be suitable, they can be changed according to preference from
+5 °C to +39 °C, by pressing the relative buttons.
!
Use
to select the temperature set point that needs changing, indicated by
the
t1 t2 t3
o
o
blinking simbol
!
Set the current set point by pressing buttons
mentarily. At each touch the value changes by 0,5 °C.
The new temperatures selected in this way will be the new set points (for all programs).
Approximately 4 seconds after the last key press, the screen will revert to displaying the
thermostat' s regular functions: the temperature SET indicator for the current time ( or
t2
or ) will be displayed.
t3
5.7 - SMART OPERATION
In "smart" mode, the chronothermostat anticipates activation automatically, so
that the desired temperature is already reached at the set time, by a period of
time which is automatically adjusted according to the characteristics of the
system. Maximum early switch-on: 2 hours.
To activate "smart operation" press and hold
Operation is indicated by:
Auto
To deselect this type of operation press and hold
indicator
Auto
disappears.
This function is active in "winter" mode only.
During operation in
"summer"
reactivated only with the next switch to
36
.
(increase) or
t2
for at least 4 seconds.
.
t2
for at least 4 seconds: the
mode, the function rimains off and will be
"winter".
SELECT TEMPERATURE SET POINT
SELECT TEMPERATURE SET POINT INDICATOR
DAY
1
t
.
0
2
4
(reduce) mo-
R
/
DAY
PROG
INCREASE TEMPERATURE
DECREASE TEMPERATURE
t1
Note:
the chronothermostat will accept temperature values that
satisfy the following conditions:
Winter:
t1 greater than or equal to t2
Summer:
t3
greater than or equal to
t°C
20
18
7.30
8.00
Time need to reach
temperature set point;
recorded in first cycle.
2
t1
t2
t3
6
8
10 12 14 16 18 20 22
°
C
/
½ h
OK
C
/
greater than or equal to
t2
greater than or equal to
t°C
Hours
8.30
7.30
8.00
8.30
T h e t i m e r e c o r d e d i s
anticipated automatically into
subsequent cycle.
t
t3
t1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis