Materiel Electrique PER1CRCR022B Bedienungsanleitung Seite 33

5 - PROGRAMMING THE CHRONOTHERMOSTAT
5.2 - FREE PROGRAM P 05
Program P 05 can be programmed freely for every hour of the day on four
different temperatures ( t1, t2, t3, t
Press PROG until P 05 appears in the display.
Confirm the selection of program
The display will show the three digits relative to the time
indicator positioned on Monday, all blinking.
To select the temperatures for the time currently blinking, press the relative button.
Setting the temperatures for Monday.
For each hour of the day, confirm the desired temperature (Comfort, Working,
Economy, Antifreeze) by pressing
Monday is complete.
Note: pressing the button t the digit not denoded on temperature scale.
It is also possible to program half-hours, as indicated in heading 5.3.
Heaving set the temperatures for
an error has been committed, program again).
When OK is pressed to confirm, the program set for
memory, the dash will blik under
time 00:00 will blink over the temperature scale for the previous day.
Note: the buttons t1, t2, t3, t can be pressed momentarily (1h forward at each
touch) or pressed and held until the desired hour is reached (moving forward
automatically 1h with each blink).
) and differently for every day of the week.
P 05 by pressing OK .
00:00
t1, t2, t3, t until the 24-hour curve for
Monday press OK to confirm the program (if
Monday is saved in the
Tuesday (2) and the three digits relative to the
.
, with the day
0 2
R
/
DAY PROG
.
0 2
R
/ DAY
PROG
.
0 2
R
/ DAY
PROG
1
DAY
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h OK C
/
1
DAY
Digits
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h OK C
/
1
DAY
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h OK C
/
G
B
t
t
t
33