Materiel Electrique PER1CRCR022B Bedienungsanleitung Seite 28

4 - INSTALLATION
4.1) DIMENSIONS
G
B
120
4.2) INSTALLATION GUIDELINES
Installation of device: indipendent - fixed
“
wall mounting - on the back round box - on rectangular flush
mounting box (3 modules)
“
install the chronothermostat at a height of 1,5 m from the floor,
far from heat sources, windows and anything that might modify
de standard operational mode.
!
28
4.3) FIXING BASE
“
Switch off mains power to device
“
Using screws, fixing the base to the wall at to the back round or
rectangural box using holes provided.
“
If the chronothermostat base is to be mounted on a metal wall,
apply two special insulating washers to the two screws
A fixing holes -
B pass wires from back round or rectangular box -
C -
27,6 22
OK!
To ensure the chronothermostat is fitted correctly to the wall-
mounted base, care must be taken to ensure that the base is not
h 1,5 m
distorted by screwing the rectangular back box too tightly to the
wall.
A
fixing clips of chronothermostat
C
A
6 7 8 9
B
C
.
3 2 1
A