Sony S-AIR EZW-T100 Bedienungsanleitung Seite 4

Notes
• Insert the wireless transmitter with
the S-AIR logo facing up. Also, make
sure the V marks on the wireless
transmitter and the slot on the S-AIR
main unit are aligned when inserting.
• Do not touch the terminals of the
wireless transmitter.
Precautions
Refer also to the Operating
Instructions of the Sony S-AIR
main unit.
On placement
• Do not place the wireless
transmitter in locations that are
hot and subject to direct
sunlight, dusty, very humid, or
extremely cold.
• Allow adequate air circulation
to prevent internal heat buildup.
• Do not install the wireless
transmitter near heat sources
such as radiators or air ducts, or
in a place subject to direct
sunlight, excessive dust,
mechanical vibration or shock.
• Keep the wireless transmitter
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
• Do not place heavy objects on
the wireless transmitter.
4
• If you use more than one set of
S-AIR products, position them
away from each other to avoid
cross talk.
• Install this wireless transmitter
and S-AIR products at least 50
cm away from people.
• To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
On cleaning
Clean the wireless transmitter only
with a soft dry cloth. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol
or benzene.