Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Self-Timer - Olympus FE-3010/X-895 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für FE-3010/X-895:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
Shooting closeups ( Macro shooting)
This function enables the camera to focus and shoot
subjects at close distances.
1
Press the & button.
2
Use mn to select the setting option, and
press the B button to set.
Option
OFF
Macro mode is deactivated.
This enables shooting as close as
MACRO
10 cm/3.9 in.
the subject.
This enables shooting as close as
*3
SUPER MACRO
5 cm/2.0 in. to the subject.
*1
When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3
The zoom is automatically fi xed.

Using the self-timer

After the shutter button is pressed all the way down,
the picture is taken after a short delay.
1
Press the Y button.
2
Use kl to select the desired setting
option, and press the B button to set.
Option
OFF
The self-timer is deactivated.
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
ON
approx. 2 seconds, and then the
picture is taken.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
Press the Y button again.
Printing
Printing images at the printer's
standard settings [ EASY PRINT]
1
Display the image to be printed on the
monitor.
Printing can also be started when the camera is
turned off. After performing Step 2, use kl to
select [EASY PRINT], press the B button. Use mn to
select an image, and press the B button.
2
Turn on the printer, and then connect the
printer and camera.
Description
*1
(60 cm/23.6 in.
*2
) to
Description
n button
Multi-connector
USB cable (supplied)
EASY PRINT START
PC / CUSTOM PRINT
3
Press the n button to start printing.
4
To print another image, use mn to select
an image, and press the B button.
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS Master 2
Install the OLYMPUS Master 2 software by referring
to the included installation guide.
Connecting the camera to a computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
The camera automatically turns on.
Multi-connector
USB cable (supplied)
USB
OK
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
OK
EN
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis