Email/Ftp - Hama 00053157 Original Bedienungsanleitung

g

Email/FTP

Email
Enter the email settings for motion detection into this window.
Email address of
the recipient
SMTP server
Email address of
the sender.
authentication (if
necessary)
User name
 Click the "Use" button to save the new settings to the device.
 Then click "Send test email" to test the email settings.
96
Field Remark
Enter the email address of the recipient here.
If there are several recipients, separate each
email address with a semicolon. You can
enter a maximum of 127 characters.
Enter the name of the outgoing mail server
here.
Enter the port number of the outgoing mail
SMTP port
server here (normally 25).
Enter the email address of the sender here.
Switch on the "activate" control if SSL en-
cryption is necessary for the SMTP server.
SSL
Switch on the "Deactivate" control if the
SMTP server does not support SSL.
SMTP Switch on the "Activate" control if the SMTP
server requires authentication before send-
ing an email.
Enter the SMTP user name for SMTP server
authentication here.
Enter the SMTP user ID for SMTP server
ID
authentication here.
Operation and configuration
00053157