Hama 00053157 Original Bedienungsanleitung Seite 34

g
by press button
Wireless connection
90
Operation and configuration
Field Remark
If the router or access point that is used
for establishing a connection supports the
press button method:
Configure
You can also press the Reset/WPS button
the button briefly. Pressing the Reset/WPS
button longer than 5 seconds resets all
device settings to factory default settings.
If the access point has already generated
Configure by
an eight-digit PinCode, enter the code
PinCode
here and click "Start PIN" to connect.
Select "Activate" if you wish to operate
the device via WLAN and "Deactivate" to
switch the function off.
Select the network connection type here:
infrastructure for connection to a router/
access point.
Network type
Adhoc for direct connection to another
WLAN-capable device.
 Click "Start PBC" and press the
PBC button to connect to the
router or access point.
7
on the back of the device. Only press
00053157