Memory Function - Terraillon TFA 6 VOCAL Bedienungsanleitung

ELECTRONIC BATHROOM SCALE - BODY FAT ANALYZER
9. Press [MODE] button to confirm all settings with
1 long beep. « R » icon will be displayed on the
R
display. The Height and Age figures will be
shown on the toggle screen, the screen will
change every 1 second.
Display for 1 second
Display for 1 second
10. Step on the scale with bare dry feet. You will hear
"Hello". Stand still while the unit measures your
weight. The weight will be displayed for 2 seconds.
You will hear: "your weight is ... kilograms".
11. Then it will start to measure your body water
and body fat percentages. The following
measurement pattern will be shown on the
display during the measurement process.
12. The measurement process finishes with 1 long
beep. The body water and body fat percentages,
weight and gender will be shown on the toggle
screen, the screen will change every 1 second.
You will hear: "your percentage body fat is ..." when
displaying body fat percentage; "your percentage
body water is ..." when displaying body water
percentage.
The unit will turn off automatically after 8 seconds.
Display for 1 second
Display for 1 second
Display for 1 second

MEMORY FUNCTION

The product features 4 personal memory settings.
This allows users to store height, age, gender
athlete/normal for frequent usage.
To store Memory
1. Follow steps 1-9 in Body Fat and Body Water
measuring Operational Procedures.
14
1680
Height
CM
R
18
Age
R
613
R
Body water %
%
F 208
Body fat
%
680
KG
Weight
2. Press [ ] to select the memory location and
/
the memory figure will be blinking.
3. If the selected memory location is occupied, it will
display " " below the memory figure.
4. Press [MODE] to store your personal data to the
desired memory location with 1 long beep.
To Recall Memory:
1. Press and hold [MODE] button for 2 seconds
while in power off mode. It will enter recall mode.
2. In Recall mode, it will display the memory loca-
tion on the display for 1 second. Then the height,
age, gender and athlete/ normal mode of the
memory will be displayed on the toggle screen ,
the screen will change every 1 second.
Display for 1 second
Display for 1 second
Display for 1 second
Display for 1 second
3. Press [ ] to select the memory location.
/
4. If the selected memory is unoccupied, no previous
input will be displayed.
5. If the selected memory is occupied, press [
at the same time to clear the contents of the
selected Memory.
6. If the selected memory is occupied, press [MODE]
to confirm the desired memory with 1 long beep.
« R » icon will be displayed on the display. The
R
height, age, gender and athlete / normal of the
memory will be display on the toggle screen; the
screen will change every 1 second.
Finally, repeat steps 10 to 12 as illustrated above.
2
M
3
M
1688
Height
M CM
18
M
Age
Normal
Athlete
]
/