Move the grinder gently along the item.
Give the grinder time to work. It is rarely
necessary to press the disc hard against the
surface to be worked.
Sparks can occur in the motor compartment
during use. This is normal and does not
mean the grinder is defective.
Switch off the grinder after use.
Cleaning and maintenance
The grinder can be cleaned by wiping its
exterior parts with a dry cloth. Filings and
dust can be removed using compressed air.
Do not use water for cleaning! Ensure the
ventilation slots are free of dust and dirt.
Never use corrosive or abrasive detergents,
as they may attack the plastic parts of the
machine.
Service centre
For:
•
Complaints
•
Replacements parts
•
Returned goods
•
Guarantee issues
•
Open 7.00 to 16.00
•
E-mail: service@hpv.dk
Declaration of compliance
We hereby declare, that
ANGLE GRINDER
11940 (S1M-LB07-230)
230 V - 1800 W
has been manufactured in accordance
with the following standards or normative
documents:
EN 60745-1-2003+A1:03
EN 50144-1:1998+A1:02+A2:03
EN 55014-1:2000/+A1:2001/+A2:2002
EN 55014-2:1997/+A1:2001
EN 55014-2-3:2002+A1:02+A2:03
EN 61000-3-2:2000
EN 61000-3-3:1995/+A1:2001
in accordance with the provisions of the
following directives
2006/42/EC
The Machinery Directive
2004/108/EEC The EMC Directive
2011
Stefan Schou
Purchasing manager
12.05.2011 - HP Værktøj A/S, DK-7080 Børkop,
Denmark
DK
NO
SE
FI
GB
DE
PL
ET
25