Angle Grinder; Technical Specifications; Special Safety Regulations - Power Craft 11940 Gebrauchsanweisung

ANGLE GRINDER

Instruction manual
Read the instruction manual
carefully before use, and keep it for
future reference.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
Power rating
GB
Indicates the machine's maximum
power.
Introduction
To get the most out of your new angle
grinder, please read through these
instructions and the attached safety
regulations before use.
Please also save the instructions in case you
need to remind yourself of the grinder's
functions at a later date.
Technical specifications
Voltage/frequency:
Power rating:
Disc diameter:
Speed:
Weight:
Acoustic pressure:
Sound output:
Vibrations:
22

Special safety regulations

Check that the ventilation slots are not
blocked.
Always secure the item to be worked with
cramps or the like. Never hold the item to
be worked by hand.
Always use the correct type of grinding disc
for the type of work to be performed.
Never use discs with a maximum RPM less
than that of the tool.
Never use oversized discs.
230V ~ 50Hz
Never use damaged or worn discs, or discs
1,800 W
that cannot be easily fitted to the grinder
230 mm
spindle. Never use an adapter ring or the
like to fit discs with holes that are too large
6,000 RPM
for the grinder spindle.
6 kg
Never allow the disc to be in contact with
89.7 dB(A)
the item to be worked - or other objects
102.7 dB(A)
- when starting the grinder.
1.9 m/s
2
Never place your hand or fingers near the
disc while the grinder is running.
Speed
Indicates the machine's speed(s)
or speed range in revolutions per
minute.
Disc size
Gives the diameter of the disc.
Spindle lock
Indicates that the user can lock the
spindle for quick change of disc or
blade.