Remote Control Unit - Technibel KPAV122 R5TA Bedienungsanleitung

REMOTE CONTROL UNIT

DISPLAY
Information is displayed when the remote control unit is switched on.
If the air conditioner is switched off, the display shows the operation
mode, the clock (hour/minutes) and the room temperature.
Operation mode
Automatic
Cooling
Heating
Dehumidification (dry)
Room temperature
Fan
detected by the
sensor of indoor unit
1-Hour timer on
Night
setback mode
Clock
(hours-minutes)
Fan speed
Automatic
High speed
Flap oscillation
switched on
Medium speed
Low speed
NIGHT SETBACK BUTTON
For details, see "Night setback mode".
When you press this button in the COOL, HEAT or DRY
mode, the mark appears on the display and the
microcomputer in the remote control unit will adjust the
set temperature to save energy.
MODE SELECTOR BUTTON
Press this button to modify the air conditioner mode.
(automatic) ‚
When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the "cool" or "heat" mode.
(heating) ‚
The air conditioner makes the room warmer.
(dry) L
The air conditioner reduces the humidity in the room.
(cooling)
The air conditioner makes the room cooler.
(fan) ✦
The air conditioner works only as a circulation fan.
‚
COOL / DRY / HEAT Models
L
Not available for
COOL / FAN Models
✦
COOL / FAN Models
FLAP BUTTON
When you press this button, the FLAP mark will
appear at the lower left of the display, and the flap
in the air outlet starts moving up and down to deliver
air over the sweep range set . To stop
sweeping, just press the FLAP button again.
1-HOUR TIMER
When pressing this button,
regardless of whether the
Selected temperature
unit is ON or OFF, the unit
for 5 seconds
operates for 1 hour and
then automatically stops.
Room temperature
Displayed when
trasmitting data
Displayed when the
temperature setting is at
the upper or lower
allowable limit
16 C min.
30 C max.
Timer switched
on OFF
Timer switched
on daily
program
Timer switched
on ON
TEMPERATURE
SENSOR
SELECTOR
COVER
The cover opens by
sliding it downward.
TRANSMITTER
SENSOR
When you press the buttons of the remote control unit,
A temperature
the
sensor inside the
setting changes to the receiver in the air conditioner.
remote control unit
detects the room
temperature.
ON/OFF OPERATION BUTTON
This button turns the air conditioner ON and OFF.
TEMPERATURE SETTING BUTTONS
Press this button to decrease the set temperature.
Press this button to increase the set temperature.
PROGRAM Button
Selection of the following functions:
• Setting the present time.
• ON-OFF Timer.
BATTERY
REPLACEMENT
BUTTON
TIMER AND PRESENT TIME SETTING BUTTONS
Setting can be activated by pressing the "Program" button (the
time indication on display alone flashes).
For details see "Setting the timer".
MM
Minutes
setting
5
mark appears on the display to transmit the
(cooler)
(warmer)
FAN SPEED SELECTOR BUTTON
Fan speed is automatically
selected by the microcomputer.
High speed.
Medium speed.
Low speed.
TIMER BUTTON (timer setting)
Timer switched OFF.
The air conditioner will stop at the
set time.
Timer switched on daily
program.
The air conditioner stops and
starts, or starts and stops, at the
set times every day.
Timer switched ON..
The air conditioner will start at the
set time.
Blank. The timer does not operate.
Time setting: to stop the unit by timer.
(Flashing).
Timer setting: to start the unit by
timer. (Flashing).
Setting present time. (Flashing).
(Use TIME SET buttons)
Inactivated position.
Hours
setting
MM
EG