Boost -MOBILE12-SET Bedienungsanleitung Seite 3

Description of the rear panel
1. Master volume control
2. Microphone volume control
3. Echo control for the microphone
4. Bass control
5. Treble control
6. Microphone input
7. Switches the LED on the woofer on /off
8. When the power adaptor is connected, the indicator lamp lights up
in red as long as the battery will be charging. It lights up in green,
when the battery is fully charged.
9. AUX input via 3.5mm mini stereo jack
10. Input selector: Press this button to switch between the various
inputs (AUX, USB, SD, Bluetooth)
11. REC button: Press this button to record the sound of the wired or
wireless mic on the USB or SD.
12. Press to go back to the previous track.
13. Play/pause
14. Press to go to the next track.
15. USB stick input
16. Mini SD card input
17. ON/OFF switch of the system
18. 9Vdc input connector
Description of the remote control
1. STANDBY: Switches the unit into standby mode.
2. Input Mode Button: Toggle between USB,TF, LINE, BT
3. Mute: Mute the sound
4. PLAY/PAUSE
5. : Select previous channel
6. : Select next channel.
7. EQ: Select EQ mode.
8. VOL-: Reduce the master volume
9. VOL+: Increase the master volume
10. REP: Repeat the playing track.
11. NO FUNCTION
12-21. Number keys for direct selection of a track on the USB flash drive or TF
card.
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.
USING THE WIRELESS MICROPHONE
Open the battery compartment and insert two AA batteries with the correct polarity.
Turn the switch on the mic to ON. If the power indicator lamp doesn't flash or doesn't light up, check if the
battery has been properly inserted.
©Copyright LOTRONIC 2018 BOOST-MOBILE-SET 3