ASROCK 775i65G Bedienungsanleitung Seite 19

ATX 12V Connector
(4-pin ATX12V2)
(see p.2 No. 1)
2.9 Driver Installation Guide 2.9 Driver Installation Guide
2.9 Driver Installation Guide 2.9 Driver Installation Guide 2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 0 2 . 1 0 Untied Overclocking T Untied Overclocking T
2 . 1 0 2 . 1 0 2 . 1 0 Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed AGP / PCI bus. You may set "CPU
Host Frequency" option of BIOS setup to [Auto], which will show you the actual CPU
host frequency in the following item. Therefore, CPU FSB is untied during overclocking,
but AGP / PCI bus is in the fixed mode so that FSB can operate under a more stable
overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk
before you apply Untied Overclocking Technology.
ASRock 775i65G Motherboard
Please note that it is necessary
to connect a power supply with
ATX 12V plug to this connector
so that it can provides sufficient
power. Failing to do so will cause
the failure to power up.
echnology echnology
echnology echnology
1 9 1 9 1 9 1 9 1 9