Cpu Installation - ASROCK 775i65G Bedienungsanleitung

2.3 CPU Installation

2.3 CPU Installation 2.3 CPU Installation
2.3 CPU Installation 2.3 CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
Step 1-2. Rotate the load lever to fully open posi-
Step 1-3. Rotate the load plate to fully open posi-
Step 2. Insert the 775-LAND CPU:
Step 2-1. Hold the CPU by the edges where are
Step 2-2. Orient the CPU with IHS (Integrated Heat
Pin1
orientation
key notch
775-LAND CPU
1 0 1 0 1 0 1 0 1 0
CPU Marked Corner
Lift Lever Up to 90°
Socket Marked Corner
down and out on the hook to clear re-
tention tab.
tion at approximately 135 degrees.
tion at approximately 100 degrees.
marked with black lines.
Sink) up. Locate Pin1 and the two ori-
entation key notches.
alignment key
orientation
key notch
ASRock 775i65G Motherboard
775-Pin Socket Overview
Pin1
alignment key
775-Pin Socket