Philips AZUR Excel PLUS series Gebrauchsanweisung Seite 9

impurity and/or scale has been washed out.
- Put the iron back on its stand. Let it heat up
again until the amber pilot light goes out.
- Remove the iron from the stand and move it
over a (preferably) old piece of cloth.
This is to ensure that the soleplate will be dry
during storage.
- Unplug and allow the iron to cool down before
storing it on the stand.
Cleaning
- Before cleaning remove the mains plug from
the wall socket and allow the iron to cool down
sufficiently.
- Scale and other setting can be wiped off the
soleplate with a damp cloth and some non-
scratching (fluid) abrasive.
Keep the soleplate smooth: avoid hard
contact with metal objects.
- The upper part of the appliance can be cleaned
with a damp cloth.
- From time to time clean the inside of the water
reservoir by filling with water and shaking.
Then pour the water back out.
Storage
• Always store the iron on the stand to prevent
damage to the soleplate.
- Remove the mains plug from the wall socket.
27
- Set the steam control
(B) to position O (= no
steam).
- Set the 3-positions
switch to position ∫
(fig. 27).
- Take the iron from the
stand. Open the filling
funnel and pour the
remainder of the water out (fig. 28).
- Place the iron back on the stand to cool down
(fig. 29).
28
29
30
- Set the 3-positions switch to the storage
position - (fig. 30).
The iron, the power unit and the stand are then
locked together.
- You can wind the cord around the stand. With
the cord clip you can fix the end of the cord
(fig. 31).
32
- Unlock the stand clamp (S) (fig. 32).
- Screw in the fixing screw completely (fig. 33).
34
- Fold the stand clamp into the stand (fig. 34).
- (Types HI 556/66 only:) First allow the iron to
cool down. Then place the carry case over the
stand.
Press onto the case to lock it to the stand
("Click!") (fig. 35).
9
31
33
35