Wash Cycles And Options; Table Of Wash Cycles; Wash Options - Indesit EWDE 71680 Bedienungsanleitung

Wash cycles and options

Table of wash cycles

Description of the wash cycle
EVERYDAY FAST
1 Colour Mix 59'
2 Synthetics 59'
3 Cotton 45'
4 Wash&Dry 90'
5 Wash&Dry 45'
6 AirFresh 30'
Special
7 Wool: for wool, cashmere, etc.
8 Delicate
9 Gym Kit
10 Cotton 60° (1): heavily soiled whites and resistant colours.
10 Cotton 40° (2): lightly soiled whites and delicate colours.
11 Cotton: extremely soiled whites.
Partial
12 Rinse
13 Spin
14 Drain
15 Cotton dry
16 Synthetics dry
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water
temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulations EN 50229: set wash cycle 10 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 10 with a temperature of 40°C.

Wash options

- If the selected option is not compatible with the program-
med wash cycle, the indicator light will flash and the option
will not be activated.
- If the selected option is not compatible with another
option which has been selected previously, the indicator
light corresponding to the first option selected will flash
and only the second option will be activated; the indicator
light corresponding to the enabled option will remain lit.
Extra Waschen
Enable the option for very dirty items, where
Extra Waschen
compatible. Press this option to let the cycle automatically re-
adjust all wash parameters through a longer lasting cycle. The
option always leaves the temperature unchanged, while the spin
cycle is automatically brought back to maximum levels. The user
can set the spin cycle back to the desired value at any time.
Easy Iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At the
end of the cycle the washing machine will perform slow ro-
tations of the drum; the indicator lights for the EASY IRON
and START/PAUSE options will flash (the first one green, the
second orange).
Max.
Max. speed
temp. Drying
(rpm)
(°C)
40° 1000 
40°
1000 
(Max. 60°)
40° 1200 
30° 1200

30° 1600

- -

40° 800

30° 0

40° 600

60° 1600

40° 1600 
90° 1600 
- 1600

- 1600

- 0 -
- -

- -

To end the cycle, press the START/PAUSE button or the
EASY IRON button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level "A1"(Iron dry).
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Delay start
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text "OFF"
appears on the display.
Detergents
Max.
Cycle
load
duration
(kg)
Main Fabric
wash softener
  7
  3
  3,5
2
 
1
 
- - 1,5
1,5
 
1
 
3,5
 
7
 
  7
  7
- 7

- - 7
- - 7
- - 5
- - 3
GB
21