Troubleshooting - Edirol AudioCapture UA-1D Bedienungsanleitung

Troubleshooting

If an unexpected problem occurs while using the UA-1D, please read this
chapter first. It provides numerous hints that will help you solve problems.
The problems covered in the troubleshooting section are organized according
to the operating system on which the problem might be encountered. Use the
icon shown at the left of the title to find the information you need.
If you are using computer for the first time, or do not understand the
explanation of a procedure, refer to the owner's manuals for your computer or
for OS.
If the UA-1D does not operate as you expect, check the following points.
Problems related to the USB driver
"Add New Hardware Wizard" does not start
up automatically
"Add New Hardware Wizard" terminates
before completion
• When the USB cable is connected or disconnected, approximately
15 seconds (or more) may be required for the UA-1D to be
recognized.
• Is the USB cable connected correctly?
Make sure that the UA-1D and computer are connected correctly by the USB
cable.
• Can USB be used on your computer?
Refer to the owner's manual for your computer, and make sure that it is able
to use USB.
28
Problems common to both Windows
and Macintosh
Problems that occur only on Windows
Problems that occur only on Macintosh