General Guidelines - HQ Power VDPL144ST Bedienungsanleitung

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.

Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Mechanical wear and LEDs are not covered by warranty.

A qualified technician should install and service this device.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

This device is designed for professional use on stage, in discos, theatres, etc.

Use the appropriate power supply (see Technical Specifications below).

Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.

There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.

Use the original packaging if the device is to be transported.

Keep this manual for future reference.
4. Features
Add some more creativity to your lightshow with the NUCLILED 144 PIXEL STROBE. This fixture features
twelve 0.35 W LEDs and a 12-zone pixel control that allow you to create special effects.

matrix-controlled LED strobe to use as one unit or to create special strobe effects via pixel control

master/slave, auto and sound-activation mode

DMX control:
4-channel mode: dimmer, shutter, auto 1, auto 2
o
12-channel mode: dimmer for each LED
o
16-channel mode: dimmer, shutter, auto 1, auto 2, dimmer for each LED
o

4-button LCD display

mounting brackets included for easy installation on any project
5. Overview
Refer to the illustrations on page 2 of this manual.
1 power input
2 mounting bracket
3 LCD display with menu buttons
V. 01 – 29/06/2015
Keep this device away from dust and extreme temperatures. Make sure the
ventilation openings are clear at all times. For sufficient air circulation, leave at
least 6" (± 15 cm) in front of the openings.
VDPL144ST
4 DMX input
5 DMX output
4 ©Velleman nv