Power Management Feature; Self Diagnosis Function - iiyama Vision Master Pro 454 Bedienungsanleitung

POWER MANAGEMENT FEATURE

The power management feature of this product complies with every power saving requirement of
E S ® and VESA DPMS. When activated, it automatically reduces unnecessary power
NERGY TAR
consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management
function, including any timer settings is configured by the operating system. Check your operating
system manual for information on how this can be configured.
n
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 3W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in 10 seconds when either the keyboard or the mouse
are touched again.
NORMAL MODE
POWER MANAGEMENT MODE
n
Even when using the power management mode, the monitor consumes electricity.
NOTE
Turn off the Power Switch whenever the monitor is not used, during the night and
weekends, to avoid unnecessary power consumption.
n
It is possible that the video signal from the computer may be on while the H or V sync signal
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
n If two separate computers are connected to the monitor, one to the VIDEO IN 1 input
connector and the other to the VIDEO IN 2 input connector, the POWER MANAGEMENT
feature will work only if both computers meet the conditions described above.
SELF-DIAGNOSIS FUNCTION
The monitor has a self-diagnosis function. The monitor diagnoses itself automatically when the
picture does not appear and the power indicator is green or orange because of the failure of
computer or monitor.
n
Procedure
A Disconnect the signal cable of the computer or turn OFF the computer.
B Turn ON the monitor.
n
Diagnosis
A A color bar picture is displayed:
The monitor is working normally. Check the computer.
B A color bar picture is not displayed:
The monitor may be damaged. Contact your dealer or iiyama service center.
Power Indicator
Green
Orange
POWER 0 3 W
CONSUMPTION
100%
OPERATING THE MONITOR 13