De Dietrich AD251 Montageanleitung Seite 12

en
1 Mounting the outdoor sensor
Fig.20
2
1
Z
1/2 Z
1 Recommended position
2 Possible position
Fig.21
12
2
1
H
1/2 H (min. 2,5 m)
1.5.2
Avoid placing the outside sensor in a position with the following character­
istics:
Half way up the wall of the area to be heated.
Under the influence of changes in the weather.
Protected from direct sunlight.
Easy to access.
1/2 H (min. 2,5 m)
H
H Inhabited height controlled by the sensor
Z Inhabited area controlled by the sensor
Positions to be avoided
Masked by part of the building (balcony, roof, etc.).
Close to a disruptive heat source (sun, chimney, ventilation grid, etc.).
1
2
MW-8800N001-3
MW-3000014-2
300020521 - v07 - 12022018