Velleman VMM502 Bedienungsanleitung Seite 16

 Click on Tinkercademy
components in your kit.
Step 3 – Coding
 Use blocks under the
in the picture below.
The block on start
64 width 128 can be found in the
can be found in the
 Drag and drop the blocks as shown below.
V. 01 – 17/01/2019
or OLED inside the Code Drawer to find our custom blocks for the various
Tinkercademy or OLED
can be found in the Basic
OLED in Code Drawer. The block
Tinkercademy in Code Drawer.
VMM502
section, to initialize the OLED and crash sensor as shown
in Code Drawer. The block
16
initialize OLED with height
setup crash sensor at pin
©Velleman nv
P0