Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 PREFACE
This manual has been drafted taking into account that the Company installing genuine Sematic products will comply
with the following necessary requirements:
•
personnel responsible for the installation and/or maintenance of the doors must be familiar with the General and
Specific regulations in force on the subjects of work safety and hygiene (89/391/CEE - 89/654/CEE - 89/656/CEE);
•
personnel responsible for the installation and/or maintenance must be familiar with the Sematic product and must
have been trained by Sematic or by an authorized Sematic agent;
•
installation equipment used must be in good working order with all measuring instruments calibrated (89/655/CEE).
Sematic:
•
undertakes to update the present manual and send the customer copies of all new updates together with material;
•
within its continuous product improvement policy, reserves the right to make changes to the designs and materials
of its products. Sematic will give an agreed reasonable time to all its customers to allow them to adapt to the new
changes their complementary current constructions;
•
guarantees a good performance only of the original parts sold directly and correctly installed.
Therefore:
parts manufactured and/or added to the Sematic product without his direct control, or non-original parts based upon
a Sematic design (even if supplied by authorised agents) cannot be considered under guarantee since the following con-
ditions have not been ensured:
1 Quality control of raw material supply
2 Process control
3 Product control
4 Conformity tests according to Sematic specifications
Furthermore, Sematic:
•
guarantees the performance life of its products only if correctly stored (indoors storage at temperatures ranging
between -10 and +60 °C out of direct sunlight) and correctly installed;
•
guarantees the perfect performance of the products installed in environments with temperatures between -10 and
+60 °C and with a non-condensing, relative humidity level included between 20% and 80%.
(Special note: for temperatures and humidity rates outside these ranges, please consult our Technical Dept.)
The present document has been drafted in accordance with the following EU Directives:
•
98/37/CE Machinery Directive and subsequent modifications (when applicable)
•
95/16/CEE Lifts Directive
•
93/68/CEE Markings
•
90/269/CEE Heavy loads handling
•
Noise (Acoustic emission) 86/188/CEE modified according to Directive 98/24/CEE
•
Electromagnetic compatibility 89/336/CEE
and with the following particular standards:
•
EN81; (+)
•
AS1735; (+)
•
EN12015/EN12016; (+)
•
EN13015; (+)
•
ASME A17.1 :2000; (*)
•
UL508C; (*)
(+) → for motors:
•
B105AAAX01 - 1 Nm Dc (B105AABX01 - 1Nm Dc sur demande)
•
B105AAAX02 - 2Nm Dc (B105AABX02 - 2Nm Dc sur demande)
•
B105AALX - Dc - GR63x55-SG120
•
B105AANX - Dc - GR63x25-SG80K
•
B105AAPX - IP54 - DC GR63x25-SG80K
•
B105AAQX - IP54 - DC GR63x55-SG120K
•
B105AAIX - Brushless - BG62x30-SG80K
•
B105AAJX - Brushless - BG62x60-SG120
•
B105AAHX - Brushless - BG62x60-PLG60
•
B105AAGX - Brushless
•
B105AATX - IP54 Brushless BG62x30-SG80K
•
B105AARX - IP54 Brushless BG62x60-SG120K
•
B105AADX - Dc
(*) → only for motors:
•
B105AAIX - Brushless - BG62x30-SG80K
•
B105AAJX - Brushless - BG62x60-SG120
•
B105AALX - Dc - GR63x55-SG120
•
B105AANX - Dc - GR63x25-SG80K
808-000-000 SDS
©
rel.3 • Edition 15 June 2009
5
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
