sematic SDS Handbuch Seite 5

Index
1 PREFACE
2 WHAT IS THE SEMATIC DRIVE SYSTEM
2.1 Speed profiles
3 GENERAL FEATURES
3.1 Technical information Sematic Drive System
3.2 Sematic Drive System
3.3 Technical information Sematic Drive System
3.4 Sematic Drive System
4 SIGNALS TO/FROM THE DOOR CONTROLLER
4.1 Sematic Drive System
4.2 Sematic Drive System
4.3 Sematic Drive System
4.4 Detector/Photocell/Barriers: Signal-Only Connection to the Door Controller (Direct Connection)
4.5 Detector/Photocell/Barriers: Complete Connection to the Door Controller
5 INSTRUCTIONS WITHOUT HANDSET
Display in Automatic and Manual Mode
5.1 Automatic Mode "AUTO"
5.2 Manual Mode "MAN"
5.3 Programming Mode "PROG"
5.4 Verify the correct working of the controller SDS
6 FUNCTIONS AVAILABLE
6.1 Reversing
6.1.1 Reversing System Force Setting (Param. Code 09)
6.1.2 Reversing system offset
6.2 Reversing System choice: INTERNAL or EXTERNAL (Param. Code 00)
6.3 Main Lift Controller Test
6.3.1 Main Lift Controller Test (When moving) [Default setting]
6.3.2 Main Lift Controller Test (When moving + Parking)
6.3.3 No MLC Signal
6.3.3.1 Instant Stop
6.3.3.2 Low Speed to Stop
6.3.3.3 Low Speed Cycle
6.3.4 Main Lift Controller Input Alarm (Param. Code 03)
6.4 Kn Input (Param. Code 04)
6.4.1 Default type
6.4.2 Limited door reversal
6.4.2 Safety edge
6.5 Car Door Locking Device (USA = Restrictor) (Param. Code 05)
6.6 Full or Framed Glazed and Heavy Paneled Doors (GLASS AND HEAVY DOORS) (Param. Code 06)
6.7 Aux Output Relay (Param. Code 07)
6.7.1 Space Percentage
6.7.2 Gong While Opening
6.7.3 Thermic alarm signal
6.8 Forced Closing [Nudging]
6.9 Fire Fighting (Param. Code 19)
6.10 Double TB
6.11 EOD (Emergency Opening Device) and timeout (Param. Code 20)
6.12 Protective Device Logic Kn (Param. Code 21)
6.13 Motor Rotation During Closing (Param. Code 22)
6.14 Motor Type
6.15 Closing parking Mode (Param. Code 25)
6.15.1 Closed skate parking
6.15.2 Opened skate parking
6.15.3 PM activation Delay
6.15.4 PM Opening space
6.15.5 PM position error
©
© (DC-PWM and AC-VVVF Brushless)
© Door Controller (DC-PWM and AC-VVVF Brushless)
© Brushless Plus (AC-VVVF Brushless Plus)
© Brushless Plus Door Controller (AC-VVVF Brushless Plus)
© (DC-PWM and AC-VVVF Brushless) connections
© (AC-VVVF Brushless Plus) connections
© set-up and incoming/outgoing signals from the door controller
808-000-000 SDS © rel.3 • Edition 15 June 2009
pag.
pag.
pag.
pag.
pag.
pag.
5
7
8
10
14
17
3