Fuses And Battery - GOLDONI SUPER SPECIAL series Bedienung Und Instandhaltung

For models with a decompression valve (n.1 fig.2), to facilitate starting, push the
lever down, turn the starter key to "2" and release the lever. When the engine
has started, release the key.

4.7.3 Fuses and battery

Before changing a fuse, find the cause of the short circuit and eliminate it.
Replacement fuses must be the same type and have the same rating-ie, 8
Ampere.
Check the electrolyte level in the battery and top up as necessary so that the
elements are covered. Add distilled water with the engine off and with no open
flames nearby. Check clamp fixing and grease them with vaseline. Keep the
battery clean and, if the machine is to be inactive for a long time, store the
battery in a dry area.
Key to electric system layout fig.A: only lights
(See last page)
1 Battery
2 Light panel
3 Horn button
4 Fuse box
5 Oil warning light (red)
6 LED (red) (not used)
7 Regulator
8 Oil pressure bulb
9 Socket
10 Horn
11 Front lights
12 Alternator
Key to electric system layout fig.B: Starting and lights
(See last page)
1 Starting panel
2 Light panel
3 Fuse box
4 Red LED (not used)
5 Oil warning light (red)
6 Oil pressure bulb
7 Starting motor
8 Battery
9 Regulator
10 Socket
11 Front lights
12 Horn
13 Alternator
Wire colours
A light blue
B white
G yellow
H grey
L blue
M brown
N black
R red
S pink
V green
Z purple
Wire colours
A light blue
B white
G yellow
H grey
L blue
M brown
N black
R red
S pink
V green
Z purple
42