Steering Handlebars; Brakes; Electric System; Controls - GOLDONI SUPER SPECIAL series Bedienung Und Instandhaltung

Do not use the differential lock when driving into bends are
during curves. If the differential does not release, help it by steering the
machine slightly to the right and left.

4.5 STEERING HANDLEBARS

The handlebars can be horizontally and vertically adjusted with lever n.1 fig.1.
The rotary cultivator can be equipped with optional reversible handle-bars.

4.6 BRAKES

Total cultivator braking is achieved by pulling n.2-3 fig.1. at the same time.
If only one lever is used, the machine turns on its axis and this is useful when
you want to switch driving direction quickly.
WARNING!: If you brake only one wheel, the machine will turn at double the
normal driving speed. Therefore, before putting the brake on, decrease the
driving speed as needed.
For on-road driving the two brake levers must be linked together with the
special retainer to prevent braking with a single brake since this would cause the
machine to skid.

4.7 ELECTRIC SYSTEM

(Available as an optional)

4.7.1 Controls

See fig.6
1 Fuse box
2 Light switch and horn button
3 Starter switch
4 Red engine oil pressure indicator light

4.7.2 Starting the engine

Starter switch (see fig.7)
0 = OFF position, no circuit live
1 = Circuit live
2 = Start engine, release the key when the engine has started and the key will
return to "1".
P = Parking lights (with switch on "1").
When the engine is running, the key must be left in "1" to allow the battery to be
charged and to operate the function status lights.
When the engine is off, turn the key to "0" and remove it from the dashboard.
41