Extending The External Microphone - Williams Sound Pocketalker 2.0 Benutzerhandbuch

Extending the External Microphone

When the Pocketalker's internal microphone is too far away
from the desired sound to be effective, the optional 3.5mm 12ft
extension cord (WCA 007 WC) can be used to extend an external
microphone to a television or another person.
WARNING!
To prevent injury, route the WCA 007 cord in a manner that prevents
it from becoming a tripping or entanglement hazard.
To extend the Microphone:
1. Plug the external microphone into the female end of the
extension cord. Arrange the cord to reach the loudspeaker of
the TV or other person. Plug the male end of the extension
cord into the microphone jack on the Pocketalker.
Using the Optional 3.5mm 12ft Extension Cord
Pocketalker: Front View
arphone or
eadphone
Headphone
jack
2. For a TV: Attach one of the plastic clips (two PLC 004 clips
are included with the WCA 007 WC kit) to the TV, near the
loudspeaker, as shown in the illustration.
16
Optional 3.5mm 12ft
extension cord (WCA 007 )
Microphone plug/jack
External
Microphone
(included)
MIC 014-R
External Microphone
(included)
Microphone Clip
(included with
WCA 007 WC)
3.5mm
12 ft Extension Cord
(WCA 007, optional)