Front View; Using The Built-In T-Coil With A Loop System - Williams Sound Pocketalker 2.0 Benutzerhandbuch

Clip
11. Adjust the tone according to your preferences. Turning
the tone control towards the top (+) boosts the treble (high
frequency). Turning the tone control towards the bottom (-)
boosts the bass (low frequency). The white dot on the dial
indicates the normal position (no treble or bass boost).
Left Side
Tone Adjustment Dial
Left Side View:
Balance
Adjust
Left Right
(Mono)
More
treble
Adjust
More
bass
nt

Using the built-in T-coil with a Loop System

The Pocketalker can be used with loop systems. When the T-coil
switch on the Pocketalker is enabled, the Pocketalker disables
the microphone input, picks up the loop signal, and sends the
eadphone/
audio through the headphone jack.
arphone
t
ack
To use this feature:
Tone
Adjust
Follow the "Getting Started" instructions and instead of step 8,
Dial
flip the T-coil switch to the "T-coil" position (up towards the T-coil
symbol). The T-coil "On" LED indicator above the switch will light
one Adjust
up.
otary Dial
Headphone/
Earphone
Jack
Balance Control
(Fully counter-
clockwise = Mono)
Tone Adjust
Rotary Dial
Front
Power On
Volume+
Adjust
Volume-
Power Off
Power On
Volume+
Tone
Tone
Adjust
Adjust
Adj.
More
Dial
Dial
treble
Volume-
Power Off
Adjust
More
bass
Normal
position
(dot in
center)
Power "On"
Green LED
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
More
bass
Front

Front View:

Right Side
Normal
position
(dot in
center)
Power "On
Green LED
Power On/
and
Volume Ad
Rotary Dial
T-coil
Switch
Lanyard Sl T-Coi
T-Coi
T-Coi
(in "O
Charg
indic
USB
Charg
11