LG 47WV30 Handbuch Seite 21

18
ENTERTAINMENT ENTERTAINMENT
Setting the Picture ID
The Picture ID menu allows you to control all sets using the IR Receiver connected to Set 1.
The IR signal of the remote control is
transmitted through the RS232C cables
connected in serial mode.
When you set a Picture ID using the
remote control, you can only control the
Set that matches the Picture ID.
ex) For example, if you set a Picture ID to
2, you can only control the monitor with
the Set ID 2.
If Picture ID is set to Off, you can control
all monitors at the same time.
Picture ID
Off
◀
Close
▶
Picture ID button
Picture ID is set according to the Total Set ID set in
the Installation Menu.
2X2 Multi-Vision (Total Set ID: 4)
IR Receiver
IR Receiver IR Receiver
1 1 1
RS232C RS232C RS232C RS232C
3 3 3
BACK EXIT
TILE
ID
ON OFF
2 2 2
Picture ID Picture ID Picture ID
Off Off Off Off Off Off
Close Close Close Close Close Close
4 4 4