LG 47WV30 Handbuch Seite 19

16
ENTERTAINMENT
Setting the Installation Menu
1
If you press the MENU button on the remote
control for more than five seconds, the main
menu appears and then disappears. The input
data is also displayed in the upper left corner of
the screen.
RGB
2
Press the "0" button four times. Press the OK
button.
1 2 3
. , ! ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
0
1/a/ A CLEAR
- * #
3
When the Installation Menu is displayed, select
the item you want.
Installation Menu (V 2.21)
LG Digital Signage Setup
White Balance Adjust
Password Change
MCU Version V2.00.0
LG Digital Signage Setup
• 15 Min Force Off
• 4 Hours Off
• Wake On LAN
• Total Set ID
• DPM
• Software Update
Previous
OK
◄ Yes ►
◄ Yes ►
◄ Yes ►
◄ 1 ►
◄ Yes ►
◄ No ►
● OK
15Min Force Turns off the monitor if there is no
Off input for more than 15 minutes.
"No" is the recommended default
value setting.
4 hours off Turns off the monitor if there is no
input on the remote control for more
than four hours.
"No" is the recommended default
value setting.
Wake On LAN Turns on the monitor remotely using
LAN.
Total Set ID Sets the maximum value for picture
IDs.
DPM Enters energy saving mode if there is
no input signal.
Software Sets whether to use NSU (Network
Update Software Update).