Whispbar K450W Montageanleitung Seite 6

EN
Fitting Kit
K450W
Place track pad over T-bolt
Thread the nut over the T-bolt by hand.
Repeat for all four positions.
Use the 3mm (1/8") Hex Key to hold the T-
bolt in a stationary position and ensure the
T-bolt has correct engagement.
Using the 10mm (3/8") spanner supplied,
tighten the nut to 5Nm (3.7 ft lb).
Tighten with provided 10mm (3/8")
spanner.
6