Maestro MR081 Bedienungsanleitung Seite 6

Before the first use
Before you use it for the first time, remove the packing materials, make sure that all parts
of the device are not damaged.
Wipe the inside and outside of the body of the thermos pot with damp cloth, then wipe.
First switching
- Set the thermos pot on a dry, flat and stable surface Picture 2.
Operation
- Open the lid. To open it, lift the button and open
the lid upwards Picture 3a.
In some models, optionally the lid can be
completely removed. To remove the lid holding it
open, press the lock button and remove the lid up
at an angle Picture 3b. To install the lid, follow the
steps in reverse order.
- Fill the thermos pot with cold water up to the
mark «FULL» (MAX) Picture 4. Close the lid until it
clicks, check whether it is securely closed.
- Unwind the power cord completely, connect
2
Picture
the power cord into the plug on the body of the
thermos pot Picture 5.
- Insert the plug into a power outlet. The light
indicator "Boiling" is to go on and the Thermos pot is
to start heating water.
- When the water boils, the light indicator "Keep
warm" is to go on and the thermos pot is to enter this
mode automatically.
- Click on "Water dispense", and drain into a suitable
container half of water capacity.
а
Then unplug the thermos pot and pour out the rest of
the water Picture 6.
b
The thermos pot is now ready for use.
Pour fresh water up to the mark «FULL» (MAX),
set up and connect the thermos pot to the mains as
indicated above.
The thermos pot is to switch on automatically, the
red indicator "Boiling" is to light up.
When the water boils, the green indicator "Keep
3
warm" is to light up, the Thermos pot is to enter this
Picture
Water boiling
6