Safescan 50 Serie Bedienungsanleitung Seite 3

ENGLISH | DEUTSCH | ČESKY | MAGYAR | БЪЛГАРСКИ | POLSKI | SLOVENČINA
To turn off the automatic standby function, press and hold the light switch button for 5 seconds, until the light guide goes out.
After releasing the button it blinks twice. Repeat to reactivate the automatic standby function.
To learn about safety features of banknotes and what to look for, please visit www.euro.ecb.int (euro), or your local national
bank website (other currencies).
5. replacing the uv-lamp
Image 1
1. Unplug the device from the power socket.
2. Hold it in your hand with the socket of the lamp facing upwards.
3. Take the UV lamp removal tool from the bottom of the device
4. Place the hook between the 2 tubes and gently, but firmly pull the lamp from the socket
5. Carefully remove the lamp from the device
6. Turn the device with the lamp socket facing downwards
7. Gently position the new lamp into the socket and press until it locks into place with a click.
6. Specifications
Dimensions (w x d x h)
Ambient temperature
Ambient humidity
Power source
Power consumption
7. Warranty
Warranty procedure
Contact Safescan for assistance: www.safescan.com
This product is in compliance with the essential requirements and other relevant provisions of the applicable European directives.
The Declaration of Conformity (DoC) is available at www.safescan.com
If possible, bring the machine to a recycling centre after usage. Do not throw away the product with the household waste.
Image 2
: 206 x 102 x 88 mm
: 0° C - 40° C (32° F - 104° F)
: < 85%
: 220-240V/50Hz
: 11W max. (Safescan 50) / 16W max. (Safescan 70)
Image 3
3