Service And Customer Care - Kenwood Choco Latte CL430 serie Bedienungsanleitung

cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never allow the underside of the
goblet to get wet.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
the tap.
●
Always wash immediately after use.
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult. However, if food has
accidentally been left to dry on,
loosen it by filling the goblet with 1
litre of water and operate with the
heating timer set to 8 and the on/off
button in position 'I'.
●
Don't wash any part in the
dishwasher.
●
Regularly dismantle the tap and
clean the parts thoroughly.
goblet
Clean the inside of the goblet using
the brush provided, then rinse
thoroughly. Fill the goblet with warm
water, open the tap and allow the
water to flush through. Dry
thoroughly and never let the
underside of the goblet get wet.
power unit
●
Wipe with a damp cloth, then dry.
lid
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seals are
correctly positioned on the goblet
dismantling the tap
1 Unscrew the dispensing tap lever
2 Wash the components, then dry
thoroughly.
3 Re-assemble the tap.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your Choco Latte Crema
●
servicing or repairs
Contact the shop where you bought
your Choco Latte Crema.
.
.
.
4