Setup Wizard - AVer EVC Kurzanleitung

Setup Wizard

For the first time using AVer EVC system, the Installation Wizard will guide you to setup your EVC system
step by step. After completing the wizard setup, user may start to use your EVC system.
1. Connect your EVC system well and turn on the power.
After your EVC system starting, user will see the
Installation Wizard screen shown up.
2. Language: Select the language of your EVC system.
Press to expand the drop-down list. Then, use
or button to move the selection and press
make the selection.
3. After selecting, press to move to "Next" option and
press to go to the next step.
4. Follow the instructions and complete your settings.
5. Click "Finish" to complete the Installation Wizard setup
and go to home menu.
6. Please press on the remote to start making a call.
Network Quick Setup Guide
Default IP address: 192.168.0.1.
Please change your EVC's IP address at the start.
There are three possible setup scenarios for most video conferencing users, if yours is:
1. Public IP Configuration (Outside of Firewall).
2. Private IP Configuration (Behind Firewall with Port Forwarding). Please refer to the following table
"EVC H.323 Related Port Usage for Firewall Setup" for your firewall Port forwarding setup.
3. H.460 Gatekeeper with Firewall Traversal. Please refer to the following table "EVC H.323 Related
Port Usage for Firewall Setup "for your firewall Port forwarding setup.
to
EVC H.323 Related Port Usage for Firewall Setup
(Please set the following ports in port forwarding in your firewall before start installing your EVC)
Port
1719
1720
30000 ~ 30299 Control and media for audio, video, content, and data/FECC
80
23
5060
Scenario 1 – Public IP Configuration (Outside of Firewall)
Your EVC is connecting directly to the internet.
1. From the remote press "Home"->
"Setting".
English-2
Function
Gatekeeper
H.323 Call setup
HTTP Interface (WebTool)
Telnet
SIP
-> 2. Press -> Network"
Type
UDP
TCP
TCP and UDP
TCP
TCP
TCP and UDP