Christie LW41 Bedienungsanleitung Seite 12

Installation
2.2 Installing the first projector (Set A) - Setting up Set A
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display
the STACK MODE dialog.
Highlight SUB
and press the ► button.
7.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting. ( 23 )
8.
If you are using Intellectual Stack, disable the remote control receiving using
KEY LOCK. (Operating Guide
• Set A will not be operated by the remote control hereafter. To
NOTE
avoid crosstalk when operating with the remote control, it is recommended to
disable the remote control receiving using KEY LOCK.
• After the STACK MODE setting is completed, Set A (Sub) will not be able
to receive the remote control signals. When STACK MODE is set to OFF,
enable the remote control receiving using KEY LOCK if
LX41/LW41 User Manual - Instant Stack Guide
pressing the ▲/▼ buttons,
(continued)
→ OPTION menu)
10
necessary.
020-000509-01 Rev.1 (06-2012)