Elmo QBiC X1 Gerätehandbuch Seite 31

●In a place exposed to frequent vibration (such as inside vehicle or machines)
●Near magnet or magnetic field
●Where organic solvents are used
■Using this product in cold place
●Touching metallic parts at the low temperature environment may infect skin. Use
gloves when using this product in the low temperature environment.
■Condensation
●"Condensation" is the formation of small drops of water on the inside or outside of this
product, especially on the inside surface of the lens, when moisture in the air
changes to liquid when it is brought from a cold place suddenly into a warm place.
●Using this product with condensation may result in malfunction.
If condensation occurs, turn power OFF, swipe the surface with a dry soft cloth, and
then leave this product in the place where humidity and dust are less and temperature
is stable (10°-30° Celsius or 50°-86° Fahrenheit is ideal). Start to use again after
condensation is completely gone.
If this product is used with the condensation left on the inside of the camera lens, the
product may not record clear images.
■Built-in microphone
●Operational sounds from this product itself may be recorded when the built-in
microphone is used; however, that is not a malfunction of this product.
■Precautions for shooting
●Recording time depends on resolution, quality for recording, and so on.
●Do not use this product where photo or video recording is prohibitedby law. Obey all
relevant laws. You may be ordered to leave, subjected to fine, be arrested,
and/orforfeit the product.
●Do not use this product for purposes prohibitedby law. Obey all relevant laws. You
may be subjected to fine, be arrested, and/or forfeit the product.
●Date/time and some other information are cleared once battery gets out of charge.
■Treatment
●Do not clean this product with strong solvents, such as thinner and benzene; they
could cause this product to malfunction.
●Wipe with a dry soft cloth.
31