Werbung
Verfügbare Sprachen
Verfügbare Sprachen
31
69
5
7
19
44
19
41
Step 5
Note: oil bushings (30) have been pre-assembled into the upper cross beam (8)
and thebutterfly arm (6&7).
1.
Attach the press bar (5) to the upper cross beam (8), using one M12x140mm hex bolt
(29), two M12 washers (69) and one M12 nylon nut (31).
2.
Attach the left butterfly arm (6) and the right butterfly arm (7) to the press bar (5),
using two M12x75mm hex bolts (48), four M12 washers (69), two M12 nylon nuts (31)
and four bolt caps (M12) (51).
3.
Attach two arm cushions (44) to the left butterfly arm (6) and the right butterfly arm
(7), using four M8x55mm hex bolts (41) and four M8 washers (19).
4.
Attach the seat cushion (14) to the seat support tube (12), using two m8x60mm hex
bolts (16) and two M8 washers (19).
5.
Attach the backrest cushion (15) to the main support tube (4), using two M8x60mm
hex bolts (16) and two M8 washers (19).
24
69
29
51
48
69
69
6
30
31
51
19
41
14
30
8
30
15
19
44
16
19
12
19
16 16
4
16
Werbung
