Werbung
Verfügbare Sprachen
Verfügbare Sprachen
19
Step 1
1.
Tap two 45mm square end caps (17) to the rear base tube (3).
2.
Remove two M10X25mm hex bolts (34) and two M10 washers (35) from two weight
guide tubes (60).
3.
Insert the weight guide tube (60) into the rear base tube (3), using two M10X25mm
hex bolts (34) and two M10 washers (35).
4.
Attach the main base tube (1) to the rear base tube (3), using two M8X65mm hex
bolts (18), four M8 washers (19) and two M8 nylon nuts (20).
5.
Attach the front base tube (2) and the plate (23) to the main base tube (1), using two
M8X65mm hex bolts (18), four M8 washers (19) and two M8 nylon nuts (20).
20
Assembly Instructions
20
19
20
19
2
18
19
23
17
19
35
20
35
19
20
34
1
60
18
3
19
17
Werbung
