Chronograph Reset - NIXON PRODUCER Bedienungsanleitung

55 05
100M
PROFESSIONAL CHRONOGRAPH
40 20
RESET
35 25
CHRONOGRAPH
To reset the chronograph, press the RESET button. This
will reset the chronograph second and minute hands to
their 0 positions.
The chronograph can be started and stopped each time
START is pressed.
NOTE: The chronograph is able to measure and display up
to one hour.
55 05 START/STOP
100M
PROFESSIONAL CHRONOGRAPH
40 20
35 25
55 05
100M
PROFESSIONAL CHRONOGRAPH PROFESSIONAL
40 20 40
35 25

CHRONOGRAPH RESET

(This procedure should be performed when the chrono-
graph second hand does not return to the 0 second
position after the chronograph has been reset. You may
also have to reset the chronograph after the battery has
been replaced.
PULL the crown out to the second position.
PRESS the START button to set the chronograph second
hand to the zero position.
PRESS and hold the start button to rapidly advance the
chronograph second hand.
Once the chronograph second hand has been zeroed,
reset the time and return the crown to its normal position.
NOTE: Don't push the crown back to its normal position while
you are returning the second hand to the 0 (12 o'clock) position.
55 05 55 05
100M
100M
CHRONOGRAPH PROFESSIONAL CHRONOGRAPH
20 40 20
35 25 35 25