Dose Log; Dose Delay And Dose Time - TechGrow T-2 Pro Handbuch

Press the PTK to confirm or wait a few seconds for
automatic confirmation.
Select >> NEXT >> and press the PTK to proceed with
setting pulse dose.
CO2 level 700
CO2 +/- 50
CO2 ALARM 1400
=> >> NEXT >>
>> NEXT >>
11.4 Pulse dose
The T-2 Pro has a pulse dose option, which enables
pulse dosed addition of CO
This option allows you to set the pulse and pause time
yourself. Moreover, it significantly tributes to creating a
stable CO level in your room.
2
=> CO2 pulse Off
Pulse pause 01m00

Dose log

>> NEXT >>
Select "CO2 pulse" and press the PTK to disable (Off) or
set the pulse dose period.
Press the PTK to confirm.
CO2 pulse Off
=> Pulse pause 01m00
Dose log
>> NEXT >>
Select "Pulse pause" to adjust the interval between CO
additions.
Press the PTK to confirm.
11.5 Dose log
The "Dose log" function allows you to see the daily
dosing time over a period of 7 days. The values are
displayed per day in hours and minutes. The "Dose log"
is reset at the beginning of each cycle (day).
Example
On the night of day 7 you see the log data of day 7
(2h01). If the lights go on after the night of day 7 and
day 1 starts again, the old log data of day 1 (1h17, from
____________________________________________________________________________________________________________________________
TechGrow | Innovative Growing Solutions
.
2
a week ago) is reset and the log function of day 1 starts
again.
Select "Dose log":
CO2 pulse Off
Pulse pause 01m00
=> Dose log
>> NEXT >>
Press the PTK to read the daily dosing times.
-1 01h17
-2 01h14
-3 01h28
-4 01h23
Scroll up and down by turning the PTK.
Press the PTK to return to page 2 of the CO
CO2 pulse Off
Pulse pause 01m00
Dose log
=> >> NEXT >>
Select >> NEXT >> and press the PTK to proceed with
setting dose delay.

11.6 Dose delay and dose time

The T-2 Pro enables dosing delay. This option allows
you to determine how long the controller has to wait
before CO is dosed after detecting light in your room.
2
2
Select "Delay time" and press the PTK. Adjust the delay
time (up to 60 minutes).
=> Delay time
Dose time
>> NEXT >>
Press the PTK to confirm.
Select "Dose time" to disable dose delay (Off) or to set
the dosing time (up to 18 hours).
menu.
2
0m
Off
30