Preparation For Operation - Graphite 58G488 Betriebsanleitung

Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Dust extraction outlet
2. Upper guard
3. Lower guard lever
4. Parallel guide locking knob
5. Saw base
6. Cutting blade
7. Collar washer
8. Bolt for cutting blade fixing
9. Lower guard
10. Spindle lock button
11. Front handle
12. Cutting depth locking lever
13. Switch
14. Switch lock button
15. Main handle
16. Brush cover
17. Knob for base bevel adjustment
0
18. 0 marker for bevel cutting
0
19. 0 marker for perpendicular cutting
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Parallel guide
2. Cutting blade
3. Hexagonal key
4. Transport case
CUTTING DEPTH ADJUSTMENT
Cutting depth can be set from the range of 0 to 65 mm.
●
Loosen the cutting depth locking lever (
●
Set desired cutting depth (use the scale).
●
Lock the cutting depth locking lever (
INSTALLATION OF GUIDE FOR PARALLEL CUTTING
Use parallel guide when cutting material to narrow pieces. Guide can be installed on left and right side of
the power tool.
●
Loosen the parallel guide locking knob (
- 1 pcs
- 2 pce
- 1 pcs
- 1 pcs

PREPARATION FOR OPERATION

12).
12) (fig. A).
4).
16